![]() Your Raspberry Pi will boot up automatically.Īfter the boot is complete, you will see the following: Once the flashing is complete, insert the MicroSD card into the Raspberry PiĬonnect the Raspberry Pi to the monitor, mouse and the keyboard and power it up. Using Etcher, flash the disk image of the OctoPi OS onto the MicroSD card Insert the MicroSD card into the MicroSD card reader and connect it to your machine.įormat the MicroSD card (FAT32 formatting only) MicroSD card (preferably 16GB or larger).5.1V/2.5 A Micro USB power supply (For the RPi). ![]() Raspberry Pi (Model 3B or later, Raspberry Pi Zero/Zero W not recommended).Customize operation with numerous plug-ins.Set up a webcam to view the Print in real time and create time lapse videos.Monitor print temperature and change print settings.Manually control a 3D printer (moving the X-, Y-, and Z-axes as well as forcing extrusion).Wirelessly upload G-code files from a computer to a 3D printer.So what exactly is OctoPrint? Here is a list of things OctoPrint allows you to do: Follow these steps to setup OctoPi OS on your Raspberry Pi in a few basic steps regardless of your machine's operating system. OctoPi GUI SetupĪ quick and easy guide to setting up OctoPi for beginners with zero experience. via OctoPi) is not recommended and can be detrimental to performance and thus achievable print results. Installing a desktop environment on your Pi running OctoPrint (e.g. The OctoPi image can in fact be run without ever having to attach a monitor to your Pi ("headless") as even the initial wifi configuration can be done just by editing octopi-wpa-supplicant.txt on the root of the SD when used as a thumb drive. You should access it via the network from a browser somewhere on your network. Please note that a GUI on the Pi is not needed for running OctoPrint.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |